Framework 
First, we need lumber for our project 
Next, we line up our boards 
After that, we put the target together 
Stain and sealant finish off the basic framework
Conveyor Belting 
We now check the size of the first strip of conveyor belting 
All the rest of the conveyor belting is measured, cut, and nailed to the frame; the seams are sealed with silicone caulking 
The conveyor belting all attached
Painting 
Base coats of white are applied 
After the center circle is outlined, masking tape is put around it, and the red interior is painted 
The outline of the squares are taped 
The upper rectangle is filled in... 
...then the lower one 
When all is painted, the tape is removed 
The finished target
Setup 
The target when put up and ready to shoot 
From a distance 
From the side, showing the framework, and the 15 degree back slant of the target 
From a slightly different angle 
And another angle 
And another... 
From the shooting line, 145m (159 yards) away
First Shots 
Our archer, Lee Yohan (Nick Duvernay) 
Bowing to the 'Jung Gahn' 
More bowing 
At the shooting line 
Getting ready to shoot 
At full draw 
Full draw, different angle 
Anchor point 
Release 
Yohan 
Yohan shooting 
New target's first hit 
Point of arrow that made first hit
|
