I feel bettter, thanks!
Still, the upper limb bends more than the lower one. Also on the upper side, the string lowers back slightly on the right (arrow side) of the center of the string bridge. I often recenter the string by hand before shooting.
Board for the discussion of topics related to Korean traditional archery
You are not logged in. Please login or register.
Korean Traditional Archery → Posts by Olivier Coulazou
I feel bettter, thanks!
Still, the upper limb bends more than the lower one. Also on the upper side, the string lowers back slightly on the right (arrow side) of the center of the string bridge. I often recenter the string by hand before shooting.
Hi there,
I own a 45# SMG artificial horn bow for few years. I noticed recently that the siyah of the upper limb is slightly twisting on the right at full draw (I'm right handed, using a thumb ring).
Attached is a picture of this.
Does any of you know if this is a normal behavior or not? Or a know problem with this type of bows?
Thanks for you advices,
Olivier
Bamboo arrows to break the nodes in the case of spine shafts 80lb (or more). Nodes are critical - fragile (hit the target edges, tree branch ...).
I don't understand this
So basically the bamboo arrow could break at the nodes regardless of the shaft spine, right?
The quality of the shaft should be considered.
I'm positive about 55-60# arrows breacking at the node when shoot at a distance of 12-15 meters.
This behavior has stopped with 75-80# shafts.
Olivier
Yes, 45# @ 32.
I use 120 grain Top Hat points.
Don't know about my paradox direction.
Regards, Olivier
Hi,
I'm using 75-80# bamboo shafts with my 45# SMG, with thumbring @32. Lower spined bamboo shafts would eventualy breack at a node when hitting the target at short distance (15 meters).
Regards,
Olivier
Hi Chad,
Allthough not a reference at all I give you my feed-back. I'm shooting a 45# SMG, pulling to 32 with thumbring. I use to get my index finger against my upper jaws, at the back of the cheek. The bow string touches the cheek up the hand.
Again, this practice might be totally wrong You fellows please correct me!
Olivier
Tip for cutting fletchings.
Cut the fletching to the required length and glue them to the arrow. Apply masking tape to both sides of the feather. Make a template of your choice and mark around this with a pen. Using a nice sharp scissors, cut around the shape and then peel off the remaining tape to reveal the fletching.
Thanks, I'll have a try!
That's very nice, Olivier! Did you use the Vario feather chopper to shape the feather? Are those Top Hat field points?
Thanks! I made my own feather burner. Home made feather burners are another topic ...
You are right, I use Tophat points, they are simply twisted on the shaft (no glue).
http://www.tophatarchery.com/
Olivier
Your comments are welcome (there ain't many bamboo arrow maker around here)
Here are some pictures of my self-made bamboo arrows. The ones with grey feathers are higher spine.
Things are much better now, the 75-80# shafts never breack when hitting the target, whatever distance.
I also noticed that the thread wrapped at the end of the rachis would worn more slowly than with former shaft.
Spine 75-80# is ok for a 45# bow with thumb release.
Still, I want to try some higher spines (80-85#, 85-90#), this is in my 2013 todo list
Hwarang Yeun Moo Goong web site
Hello Gabriel,
What is the url of YMG web site?
Olivier
"There’s one more important thing. I can hardly imagine a Chinese — or Indian, Japanese, Tibetan, Persian, etc. — adept of a tradition who does not know, study, and often memorize the main texts of his or her tradition. Knowledge of the written records of a tradition should also be important for a Western follower. Without that knowledge, a Western follower could easily end up twisting and distorting the tradition that he or she claims to belong to, according to his or her own particular perspective. Any Eastern tradition teaches exactly the opposite attitude: until one reaches a truly advanced stage, one should follow the tradition “as is,” with no attempt to reinterpret it or adapt it to any contingent circumstance. The re-adaptation (or rather, re-codification) of a teaching to different historical or social circumstances is a very important and interesting phenomenon in the history of any traditional teaching."
Actually, this aspects of eastern culture can be disconcerting for a western follower. However, let's consider two more things:
1) I'm fond of chinese and japanese popular novels. I have found that in many of those stories, the hero would achieve success by finding his own way, possibly against tradition upholders. This schema is very close to western novel tradition.
2) Western educational system is based on the study of tradition and science as well.
This makes me think that individual aspirations to break rules, and on the other side the collective wiseness that tends to transmit tradition, are both shared by humanity. It is chaos against order.
Maybe the difference is in the fact that challenging the tradition is not - or less - considered as incorrect in western culture. A matter of etiquette?
My two cents,
Olivier
Are those shafts you ordered from the UK from Mark Hill?
Yes they are.
Olivier, did you get the new shafts from Jaap? Any photos?
Not that fast I was refering to shafts I ordered 2 weeks ago from my ebay supplier in UK. These are not marked "Tiger", allthough.
If I order shafts from Jaap, which may happen when I'm fixed with the spine I need, I will post some pictures.
Cool design.. but I have no idea how it fit with thumb.
Here you are:
http://www.koreanarchery.org/punbb/misc … r=1296t289
Better pictures of a same ring : https://picasaweb.google.com/1006251341 … directlink
Just received new bamboo shafts with spine 75-80#!
I switched to 11/32 arrow points to fit larger diameter of the shaft. Those points are 120 gr instead of 100 gr on my former arrows.
New arrows hit the target with no angle, but 10 cm to the right, due to higher spine I guess. So far so good, I didn't break today
Here is a horn ring I made before I got some plastic standard thumb rings from korea. Don't use it too much anymore but I like the design.
Here is a picture... Note that I found this thumb ring ok until I began to practice about 1 hour or two each day.
Hello,
My thumb hurts sometime after practicing a lot, the skin being pinched by the ring on the internal face of the thumb.
I tried to glue some leather inside ring of a higher size, and found it much more confortable.
Does someone use any thumb ring protection ?
Olivier
What about bamboo shafts from Korea? I read that they are the best one can find... Anyway shipping cost to France might be prohibitive, as well as Jaap Koppedrayer's I fear...
Thanks Thomas. I m using 55-60# actually. Yes, they breack at the node. I m shooting at a straw target at 12 meters for training. I buy shafts from an ebay seller in UK , the shafts have Tiger marked on them.
Hello,
I'm using 55-65# bamboo shafts but my arrows are breaking in the middle.
What spine do I need for a 45# bow (SMG artificial horn bow) with thumb ring release?
Olivier
Korean Traditional Archery → Posts by Olivier Coulazou
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 11 official extensions. Copyright © 2003–2009 PunBB.